Introduction for industrial plastic shredder/plastic lumps shredder
The industrial plastic shredder/plastic lumps shredder is a solid waste reduction machine ,an environmental shredder equipment used to shred high-density polyethylene HDPE plastic products ,and a wide range of other waste plastic materials. The industrial plastic shredder is conducive to plastic recycling and regeneration of plastic particles. Applications:plastic lumps,plastic pipe ,plastic board, plastic film,bag ,mineral water bottles, PET bottles, oil bottles, gasoline bottles, plastic barrels, etc.
According to the different materials, the number of cutters and cutters can be customized:
The working principle of industrial plastic shredder/plastic lumps shredder :
The plastic shredder consists of four parts: the shredder mechanism, the bracket, the recycling box and the pull cart. The size of the equipment is determined by the material size and material handling capacity. The plastic shredder is internally designed with a filter device. When the plastic shredder is working normally, the filter plays a role in separating materials and liquids, effectively recycling the liquid remaining on the bottle.
The industrial plastic shredder is performed by single shaft shredder. It uses the movable knife and the fixed knife to interact with the fixed knife, and controls the discharge granularity through the screen to shred, cut and squeeze the material. Material is processed to a smaller particle size. It is often used for the fine crushing of various solid wastes. It can be processed into smaller particle sizes at one time, and is widely used in the fields of resource recycling, RDF (domestic waste-derived fuel) production, and garbage reduction. It has the characteristics of small discharge particle size, screen changeable, wide material applicability and high efficiency.
Industrial plastic lumps shredder characteristics:
1. Single shaft shredder has characters as follows: single shaft shredder properties as follows: strong, durable.
Single shaft shredder/plastic lumps shredder is suitable to recycle a variety of bulk solid materials, refractory materials, plastic containers and plastic barrels, plastic films, fibers, paper. Shredded particles can be small to 20mm according to different needs. We can provide all kinds of feed hopper; low speed rotary cutter in accordance with customer needs , which will be low noisy and energy saving.
2. Single shaft shredder consists of a knife disc and a static knife to complete shredding material.
Cutter is composed of a base shaft and several shape quadrilateral knife block. The knife block has 4 blades, can be replacing the use of. The knife block along the axis of the base is in multiple rows into type V, and fixed with screws in the radical axis, rotated with the based shaft together, finally comprise a knife disc. The two static knife is fixed on the machine frame. The material is sent to the cutter by the horizontal hydraulic cylinder. The speed is stable and adjustable, and the propulsive force is large and uniform. It is applicable to the recovery of a variety of bulk solid materials, refractory materials, irregular plastic containers and plastic barrels, tubes, films, fibers, paper etc. Spindle speed is 45 ~ 100 rpm/min.
3. We can offer a variety of rotor configurations to suit different applications.Such as：High Performance Rotor、Hard Material Rotor and Soft and Film Rotor.
4. When customers choose the rotor, we can also offer different knives holder to suit different requirement. Such as:Welded Knife holders.Assembled Knife holders and CNC cutting knife holders.
SCS600 single shaft shredder
电机功率（Shredder driving Power)：
22 kw/plastic lumps shredder
动刀数量（Qty of rotary shredder blades)：
定刀数量（Qty of Fixed shredder blades）：
刀片材质（Materials of shredder blades）：
主轴回转直径（Diameter of Rotor）：
撕碎室尺寸（shredding room size)：
液压站功率（Hydraulic motor power）：